GParted Live on USB.pdf

(47 KB) Pobierz
GParted Live on USB
http://gparted.org/liveusb.php
GNOME Partition Editor
Home
Download
Live CD/USB
Help
News
Develop
Custom Search
Donate
GParted Live on USB
The bootable
GParted Live
image can also be installed on a USB flash drive.
Following are instructions on how to setup GParted Live on your USB flash drive using either
MS Windows
or
GNU/Linux.
NOTE: These installation methods only work when the USB flash drive is formatted with a
FAT file system. Some users have reported that only the FAT16 file system worked for them.
For other file systems you might try to use grub or some other boot loader.
USB setup with Windows
Choose one of the following methods to setup GParted Live on your USB flash drive using
MS Windows:
Windows Method
Windows Method
Windows Method
Windows Method
A: Tuxboot
B: Manual
C: Unetbootin
D: LinuxLive USB Creator
Windows Method A: Tuxboot
1. Download
Tuxboot
on your MS Windows computer.
2. Follow the
USB setup with MS Windows
instructions to install GParted Live on your
USB flash drive.
Windows Method B: Manual
WARNING!
DO NOT RUN makeboot.bat from your local hard drive!
Doing so could cause your MS windows not to boot!!!
1.
Download
the GParted Live
zip
file.
2. If you already have a partition of at least 300 MB in size on your USB flash drive
formatted with a FAT file system then skip to the next step (3).
Otherwise create at least a 300 MB partition on your USB flash drive and format it with a
FAT16 or FAT32 file system.
The partition must be large enough to hold the extracted contents of the GParted Live zip
file.
1z5
2015-10-05 09:46
GParted Live on USB
http://gparted.org/liveusb.php
3. Extract all the contents of the zip file to FAT16/FAT32 partition on your USB flash drive.
Keep the directory architecture, for example, file "GPL" should be in the USB flash
drive's top directory (e.g. G:\GPL).
4. Browse to your USB flash drive and as an administrator, click the makeboot.bat in the
dir utils\win32\.
WARNING!
Makeboot.bat must be run from your USB flash drive.
5. Follow the on-screen instructions.
(PS: The above description is modified from: http://www.pendrivelinux.com/2007/01
/02/all-in-one-usb-dsl. Thanks to PDLA from http://pendrivelinux.com)
Windows Method C: Unetbootin
CAUTION:
Unetbootin creates a different boot menu.
Therefore it is recommended to use method A or B.
1. If you already have Unetbootin installed on your computer then skip to the next step (2).
Otherwise download and install
Unetbootin
on your MS Windows computer.
2.
Download
the GParted Live
iso
file.
3. From Windows, run the Unetbootin program and follow the instructions in the GUI to
install GParted Live on your USB flash drive.
Windows Method D: LinuxLive USB Creator
1. If you already have LinuxLive USB Creator installed on your computer then skip to the
next step (2).
Otherwise download and install
LinuxLive USB Creator
on your MS Windows computer.
2.
Download
the GParted Live
iso
file.
3. From Windows, install then run the LinuxLive USB Creator program and follow the
instructions in the GUI to install GParted Live on your USB flash drive.
USB setup with GNU/Linux
Choose one of the following methods to setup GParted Live on your USB flash drive using
GNU/Linux:
GNU/Linux Method
GNU/Linux Method
GNU/Linux Method
GNU/Linux Method
A: Tuxboot
B: Manual
C: Unetbootin
D: Manual - Overwrite
GNU/Linux Method A: Tuxboot
1. Download
Tuxboot
on your GNU/Linux computer.
2. Follow the
USB setup with GNU/Linux
instructions to install GParted Live on your USB
flash drive.
2z5
2015-10-05 09:46
GParted Live on USB
http://gparted.org/liveusb.php
GNU/Linux Method B: Manual
WARNING!
Confirm you have the correct path name before executing commands!
Failure to do so could cause loss of data or your GNU/Linux not to boot!!!
/dev/sde
is a device path name
/dev/sde1
is a partition path name
1.
Download
the GParted Live
zip
file.
2. If you already have a FAT16 or FAT32 partition on your USB flash drive then skip to the
next step (3).
Otherwise prepare at least a 300 MB partition formatted with either a FAT16 or FAT32
file system.
The partition must be large enough to hold the extracted contents of the GParted Live zip
file.
If the USB flash drive or USB hard drive does not have any partition, you can use a
partitioning tool (e.g. gparted, parted, fdisk, cfdisk or sfdisk) to create a partition with a
size of 300 MB or more.
Here we assume your USB flash drive or USB hard drive is /dev/sdd (You
have to
comfirm your device name, since it's _NOT_ always /dev/sdd)
on your GNU/Linux, so
the partition table is like:
# fdisk -l /dev/sdd
Disk /dev/sdd: 12.8 GB, 12884901888 bytes
15 heads, 63 sectors/track, 26630 cylinders
Units = cylinders of 945 * 512 = 483840 bytes
Disk identifier: 0x000c2aa7
Device Boot
/dev/sdd1
*
Start
1
End
26630
Blocks
Id
12582643+
System
b W95 FAT32
Then format the partition as FAT with a command such as "mkfs.vfat -F 32 /dev/sdd1"
WARNING!
Executing the mkfs.vfat command on the wrong partition or device could
cause your GNU/Linux not to boot. Be sure to confirm the command before you run it.
# mkfs.vfat -F 32 /dev/sdd1
mkfs.vfat 2.11 (12 Mar 2005)
3. Insert your USB flash drive or USB hard drive into the USB port on your Linux machine
and wait a few seconds. Next, run the command "dmesg" to query the device name of
the USB flash drive or USB hard drive. Let's say, for example, that you find it is
/dev/sdd1. In this example, we assume /dev/sdd1 has FAT filesystem, and it is
automatically mounted in dir /media/usb/. If it's not automatically mounted, manually
mount it with commands such as "mkdir -p /media/usb; mount /dev/sdd1 /media/usb/".
4. Unzip all the files and copy them into your USB flash drive or USB hard drive. You can
do this with a command such as: "unzip gparted-live-0.4.5-2.zip -d /media/usb/"). Keep
the directory architecture, for example, file "GPL" should be in the USB flash drive or
USB hard drive's top directory (e.g. /media/usb/GPL).
5. To make your USB flash drive bootable, first change the working dir, e.g. "cd /media
/usb/utils/linux", then run "bash makeboot.sh /dev/sdd1" (replace
/dev/sdd1 with your
USB flash drive device name),
and follow the prompts.
WARNING!
Executing makeboot.sh with the wrong device name could cause your
3z5
2015-10-05 09:46
GParted Live on USB
http://gparted.org/liveusb.php
GNU/Linux not to boot. Be sure to confirm the command before you run it.
NOTE: There is a known problem if you run makeboot.sh on Debian Etch, since the
program utils/linux/syslinux does not work properly. Make sure you run it on newer
GNU/Linux, such as Debian Lenny, Ubuntu 8.04, or Fedora 9.
TIP:
If your USB flash drive or USB hard drive is not able to boot, check the following:
Ensure that your USB flash drive contains at least one FAT partition.
Ensure that the partition is marked as "bootable" in the partition table.
Ensure that the partition starts on a cylinder boundary.
For the first partition this is usually sector 63.
GNU/Linux Method C: Unetbootin
CAUTION:
Unetbootin creates a different boot menu.
Therefore it is recommended to use method A or B.
1. If you already have Unetbootin installed on your computer then skip to step 2.
Otherwise install
Unetbootin
on your GNU/Linux computer.
2.
Download
the GParted Live
iso
file.
3. From GNU/Linux, run the Unetbootin program and follow the instructions in the GUI to
install GParted Live on your USB flash drive.
GNU/Linux Method D: Manual - Overwite
WARNING:
Confirm you have the correct device path name before executing commands!
This method will overwrite the destination device. Hence it is critical to
select the proper USB flash device.
Since GParted Live is based on Debian Live and this image is a isohybrid, the GParted
Live
CD image can be written directly to a USB flash drive.
1.
Download
the GParted Live
iso
file.
2. Insert the USB flash drive your Linux computer and wait a few seconds. Next, from a
terminal window run the command:
dmesg
This command queries the device name of the USB flash drive. For example, you might
find the device name is
/dev/sde.
3. From a terminal window, enter the following command using the gparted .iso file name
and USB device path you discoved in the previous steps.
For example:
4z5
2015-10-05 09:46
GParted Live on USB
http://gparted.org/liveusb.php
sudo dd if=/path-to-gparted-live.x.y.z-w.iso of=/dev/sde bs=4M; sync
Documentation FAQ Forum Bugs Features Screenshots Articles Contact
5z5
2015-10-05 09:46

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin