szablon kart sim.pdf

(497 KB) Pobierz
Equipment:
Mini/MicroSIM to NanoSIM cutting guide
- Ruler
- Tape
- Good quality scissors (test on old credit card)
- Nail le or sand paper (220 grit or higher)
- Permanent felt tip marker pen
Instructions:
1. Measure side rulers on guide to ensure guide
has been printed to the correct scale.
2. Tape SIM to matching center outline with
gold contacts up. Place tape on edges so as to
not cover Nano SIM area.
3. Align ruler to cut line so that the ruler covers
the gold contacts and mark with permanent
marker felt pen. Repeat for the 5 cut lines.
4. Remove SIM from this sheet and trim with
scissors so that a portion of the marker lines are
still visible. Use nail le or sand paper to trim so
that no marker lines can be seen. Trim further
and round corners with nail le or sandpaper
until it ts in the iPhone 5 SIM tray.
5. Sand or le plastic logo side of SIM so that it
sits ush with the edge of SIM tray (0.67 mm).
Hold SIM and rub against le or sand paper. DO
NOT sand gold contact side.
6. Finish by lightly sanding all edges.
GoSoftWorks takes no responsibility to damage
caused to the SIM or phone. It’s your own risk.
8.8 mm
6 Inches
15 cm
0.67 mm
thickness
12.3 mm
Guide provided by GoSoftWorks. Makers of the astronomy
GoSkyWatch Planetarium app.
Go outside and explore the night sky.
www.gosoftworks.com
15 cm
6 Inches

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin