(1) First,prepare a formatted TF card,copy the Software File (FW96650A.bin) to TF card (2) Insert the card into the machine and then plug in the power,the machine will be turn on and automatically enter the brush machine state (Note: Be sure to plug in the power to turned on machine and upgrade firmware, if the machine is a low power, then easily lead to Brush dead) about 40 seconds later the machine will automatically reboot, It the camera has been brushed successful (3). Brush process, we must not pull the card, not cut off the power, otherwise failed to brush machine, the machine crashes (crashes Brush can not remedy). (Note: After Brush success,please make sure format the card, so as to avoid repeating brush machine) (Note:If the Software File (FW96650A.bin) can not brush successful ,please try to rename the file to FW888SA.bin)
jaremi1