Guida_Rapida_sw_BCT_en.pdf
(
3677 KB
)
Pobierz
QUICK START GUIDE
TO
CALIBRATION TOOL
Introduction
CALIBRATION TOOL is the diagnostics and calibration software for LPG and CNG systems.
The
CALIBRATION TOOL
software can be used on the following ECUs:
•
Sequent Plug & Drive MY10
•
Sequent 24 MY10
•
Sequent Plug & Drive 5-‐, 6-‐, 8-‐cylinder
•
Sequent 32
•
LPG Direct Injection
!
ATTENTION!:
The software change its structure according to the kind of ECU connected, only showing sections dedicated to
that specific system and license
.
Installing/Updating CALIBRATION TOOL
The CALIBRATION TOOL installation and update package can be downloaded from the www.brc.it reserved area.
Proceed as follows:
1. Enter the RESERVED AREA > SOFTWARE MAPS INSTRUCTIONS VEHICLES>CALIBRATION TOOL section of www.brc.it.
2. During the first installation only, download the file
System Requirements
and execute.
3. Download the Installation/Update file and execute.
2
4. Starting the Calibration Tool for the first time, an
Application Information
window appears showing the computer
“Activation code”.
License management
A license should be required by the user in order to upload it on software and use CALIBRATION TOOL.
Every license is for exclusive use of the computer where CALIBRATION TOOL has been installed. No other computer can use it.
The license includes all software graphic and function authorizations.
License requirement
CALIBRATION TOOL license can be required at the suitable section of www.brc.it reserved area.
Please follow this procedure:
1. Open CALIBRATION TOOL and enter the section
UTILITY>Application Information.
2. Copy activation code from the box below.
3. Enter the RESERVED AREA at the section SOFTWARE MAPS INSTRUCTIONS VEHICLES>CALIBRATION TOOL of
www.brc.it.
3
4. Click on the central button
.
5. Paste activation code where required and click on
Request License
6. File.lic will be automatically downloaded on your PC.
License upload
License previously required should be uploaded to CALIBRATION TOOL to start.
Double click on CALIBRATION TOOL icon
on desktop to start the application.
Select
Utility
>
Application Information
from the main menu to enter the windows shown below
Click on
License File Upload
and select the file required.
Press OK. The system records it allowing user to access all functions and strategies enabled by the license.
4
A restart confirmation message appears.
Now the software is ready to use.
Once you connected communication cable to the gas ECU diagnostic connector and PC USB port, click on button
Connect K
Line
top left to activate communication with ECU.
The system automatically detects the right communication port. This operation is only carried out at the first connection; then
the system records the communication port used.
!WARNING!:
if you change communication cable position, the system will automatically search the new one.
When communication with ECU is ok, the button top left turns red.
Bottom of the screen, the status bar informs that ECU and OBD communication are connected.
Using CALIBRATION TOOL
PROGRAMMING
Aided procedure
The aided programming procedure is used when you want to install a new vehicle of which the map is not available. Specific
features are so set up before carrying out the real self-‐mapping. The number of steps of aided procedure depends on
selections made.
Installer is guided step by step through the whole procedure by some messages.
The buttons
NEXT
and
PREVIOUS
at the bottom of the window allow to go backwards and forwards of one or more steps.
From the main menu select
Programming
>
Aided Procedure
to start the aided programming.
Click on
Confirm
and a new window appears, called
Type of equipment,
which should be filled in with system features.
Type of equipment
It specifies more information about the system installed and vehicle.
5
Plik z chomika:
kubuspucharek
Inne pliki z tego folderu:
Guida_Rapida_sw_BCT_en.pdf
(3677 KB)
BRC_Calibration_Tool_Setup_1.7.58.6.exe
(204369 KB)
ToolRequirements_Setup_1.0.0.1.exe
(56971 KB)
SequentPD_Ver_30802.exe
(41561 KB)
zli_calibration_tool_setup_1.7.58.6.zip
(52991 KB)
Inne foldery tego chomika:
4 GAS
AEB
Ag HOLANDIA
AG ZENIT COMPACT
AGIS
Zgłoś jeśli
naruszono regulamin