GPS VEHICLE TRACKER
USER MANUAL
Preface
Thank you for purchasing the TK103 GPS vehicle tracker. This manual shows how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Please note that specification and information are subject to changes without prior notice in this manual. Any change will be integrated in the latest release. The manufacturer assumes no responsibility for any errors or omissions in this document.
Contents
◆Quick Using 3
◆GPS Vehicle Tracker Installation 3
1 Summary functions 4
2 Hardware Description 4
4 Specs. 5
5 Usage 6
5.1 Installation SIM card 6
6. Set up 7
1. Initialization 7
2. Add authorized number 7
3. Delete authorized number 7
4. Change the Password 7
5. Resume the initial password 8
6. Enquiry Positioning 8
7. Control Oil 8
8. Control Circuit 8
9. Monitor mode 8
10 Movement alert 8
11. Overspeed alert 8
12. Geo-fence 9
13 . Restart the tracker. 9
14. Auto track 9
15. Set ACC open and close time interval 9
16. Set ACC open and close SMS notify 9
17. Set country time zone 10
18. Modes switch between “track” and “monitor” 10
19. Modes switch between “telephone” and “web” 10
20. Modify IP address and port 10
21. Set Device ID number 10
22. Set APN 10
23. Set GPRS user name and password 10
24. Set Web 11
7 Command list 11
1) Inset GSM card, connect GPS GSM antennas and external power supply.
2) Put GPS antenna outside, around 30s blue light will keep stable on and with red light flash at 2 seconds, means device can start normal working.
3）Make a call to device number or send SMS “google” to device number, it will reply a tracking message show location.
4）if need real time tracking on computer, please send 2 SMS commands connect to platform as below:
SMS 1: ip116.205.4.114port8169
SMS 2: apn123456+space+APN of operator
SMS 3: user+space+ APN user name+space+APN password（if no APN user name and prd, skip this）
SMS 4: number+latter 11 digits of device IMEI number(also can use device GSM card number)
5）login tracking platform to check real time location( please contact your supplier)
GPS tracker should be installed by technical professional of local service centre. Without permission, the user cann’t repair and move the tracker randomly. If users do, any unfortunated damage should be compensated by himself.
Installation steps (caution: the following installation should under no power, otherwise will be dangerous)
1. Install GPS and GSM antennas: GPS antenna can’t cover with metal. (necessary)
2 . Power supply line: The red wire connects 12V“+”;Black wire connects to 12V“-” (necessary)
2. Device light status:
Red represents GSM signal, blue represents GPS signal, when blue light stable lighting on and flash with red light at 2 seconds (red and blue is same light ).
3. Wire for cutting off oil or circuit of the tracker(optional connect)
Relay white wire connects positive +; relay yellow wire connects device yellow wire; two green wires connect Oil pump or circuit two ends. Caution: Wrong connection of yellow wire will damage the tracker.
4. Emergency triggering alarm (optional connect)
The blue wire connects the positive of the alarm button, and the black wire connects the negative of the alarm button.
Working Based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets by SMS or GPRS.
1.1 Positioning and Tracking: Through the on-line Positioning Platform or the cell phone to locates at times, and get the working status. You can choose the Positioning Platform by yourself. 1.2 Triggering Emergency Alarm: When there is a emergency happened on the vehicle, you can put on the button and the installed unit will send out alarm to the authorized numbers.
1.3 Remote controlling oil and circuit: you can control the oil and circuit via the unit by SMS in anywhere and anytime.
1.4 Remote Monitoring: In anywhere and anytime, call the phone number in the unit, when it connects, you can monitor the sound around 5 meter. 1.5 Movement Alert: Send SMS to the unit to start the movement alert function. When the vehicle is moving, the unit will send the movement alert to all authorized numbers.
1.6 Overspeed Alert: Send SMS to the unit to start the movement alert function. When the vehicle is overspeed, the unit will send the overspeed alert to all authorized numbers.
1.7 Geo-fence: Set up a geo-fence for the unit to restrict its movements within a district. The unit will send the message to all authorized numbers when it breaches the district.
1.8 Resume the unit: send SMS to resume the default of unit.
1.9 Auto Track: You can set up auto track by SMS or on-line positioning platform.
1.10 Mileage statistics; ACC checking; cutting off power and alarm.
1.11 Compatible with the original anti-theft alarm: It will send SMS alarm after the original anti-theft alarm warning.
1.12 Modify the IP and Port of Communication Protocol for different on-line positioning platform
2.1 Front face 2.2 Rear face
2.3 Side face
GSM/GPRS ANTENNA
GPS ANTENNA
INDICATOR lights
mimi31