FPA50NetGuide_en_3.0.pdf

(14052 KB) Pobierz
Modular Fire Panel
FPA-5000
en
Networking Guide
Modular Fire Panel
Table of Contents | en
3
Table of contents
1
2
3
3.1
3.1.1
3.1.2
3.2
3.2.1
3.2.2
3.2.3
3.2.4
3.2.5
3.3
3.3.1
3.3.2
3.3.3
3.3.4
3.3.5
3.3.6
3.4
3.4.1
3.4.2
3.4.3
3.4.4
3.4.5
3.4.6
3.5
3.6
4
5
5.1
5.2
5.3
5.4
5.5
6
6.1
6.2
6.3
6.4
6.5
6.5.1
6.5.2
6.5.3
6.5.4
6.5.5
6.5.6
Safety instructions
Short Information
Ethernet networking
Procedure
Standard procedure for smaller projects
Medium-sized and large projects
Special features of the FPA network
Protocols
Network diameter
Cables used
Extension of existing networks
Ethernet/IP communication
Ethernet topologies
Key
Ethernet loop without OPC server
Ethernet loop with OPC server
Ethernet/CAN double loop
Ethernet backbone with sub-loops (Ethernet/CAN)
Connecting Ethernet loops
UGM-2040 networks with dual homing
Standard Ethernet settings of FPA‑5000 with UGM‑2040
FPA-5000 with basic network connection to UGM-2040
FPA-5000 - UGM-2040 dual homing
Redundant FPA-5000 - UGM-2040 dual homing
FPA-5000 CAN loop - UGM-2040 dual homing
Redundant FPA-5000 CAN loop - UGM-2040 dual homing
Condition Monitoring
Praesideo connection
CAN networking
RPS settings
FPA‑1200/FPA‑5000 network nodes
Line numbers
Switches
OPC servers
UGM-2040 servers
Installation
Installing media converters in the mounting frame
Installing media converters in PSS 0002 A/USF 0000 A
Settings on media converter
Installing switches in PSS 0002 A/USF 0000 A
Settings on switch
Assign IP address
Program redundancy settings
Programming the fault relay
Programming connection monitoring
QoS priority, only for UGM‑2040
Activating IGMP snooping, only for Praesideo
Networking Guide
5
6
7
7
7
7
8
8
8
11
12
12
13
15
17
18
20
21
23
25
25
26
27
27
28
29
29
31
33
36
36
36
37
37
38
39
39
40
41
42
43
44
45
45
46
46
46
2013.05 | 3.0 | F.01U.247.450
Bosch Sicherheitssysteme GmbH
4
en | Table of Contents
Modular Fire Panel
6.6
7
7.1
7.1.1
7.2
7.3
8
8.1
8.2
8.2.1
8.2.2
8.2.3
8.2.4
CAN network
Connections
Cabling of panel controller
Media converters and power supply
Switch with power supply and fault relay
Cabling of FMR‑5000 remote control unit
Appendix
Ethernet error messages
Non EN 54-compliant topologies
Non-redundant network with switches
Redundant RSTP network with switches
Redundant dual homing network with switches
Redundant RSTP network with switches and CAN/Ethernet loops
Glossary
Index
48
58
58
58
59
62
64
64
65
65
67
68
69
71
72
2013.05 | 3.0 | F.01U.247.450
Networking Guide
Bosch Sicherheitssysteme GmbH
Modular Fire Panel
Safety instructions | en
5
1
Safety instructions
Notice!
An exclusive Ethernet network is required in order to set up a central fire alarm network. For
safety reasons, no networks used for any other purpose may be used in this capacity.
Notice!
To ensure that the network is set up in compliance with EN 54, use only components that
have been approved for use in central fire alarm networks.
Notice!
For security reasons, do not use open access via the internet for programming and remote
diagnosis. Use VPN-protected access.
Notice!
For standard applications, use only standard network settings.
Changes to standard network settings are permitted only for experienced users with
appropriate networking knowledge.
Warning!
Laser light.
Do not look directly into the beam with the naked eye or with visual instruments of any kind
!
(e.g. magnifying glass, microscope). Failure to observe this notice poses a danger to the eyes
at a distance of less than 100 mm. The light emerges at the visual terminals or at the end of
the fiber optic cables connected to these. CLASS 2M light-emitting diode, wavelength
650 nm, output < 2 mW, in accordance with DIN EN 60825‑1:2003‑10.
Bosch Sicherheitssysteme GmbH
Networking Guide
2013.05 | 3.0 | F.01U.247.450

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin