1132.PDF
(
43 KB
)
Pobierz
MAX4278 Evaluation Kit
_______________General Description
The MAX4278 evaluation kit (EV kit) simplifies evalua-
tion of the MAX4178/MAX4278 330MHz/310MHz high-
speed buffers. RF-style connectors (SMA) and 75Ω ter-
minating resistors are included for video test equipment
compatibility.
The EV kit comes with the MAX4278 installed. To evaluate
the MAX4178, simply order a free sample (MAX4178ESA)
and replace the MAX4278 with the MAX4178. No other
changes are necessary.
____________________________Features
o
310MHz -3dB Bandwidth
o
75Ω Terminated Input and Output
o
Fully Assembled and Tested
Evaluates: MAX4178/MAX4278
______________Ordering Information
PART
MAX4278EVKIT-SO
TEMP. RANGE
+25°C
BOARD TYPE
Surface Mount
____________________Component List
DESIGNATION QTY
U1
C1, C6
1
2
DESCRIPTION
Maxim MAX4278ESA
10µF, 10V, 20% tantalum capacitors
AVX TAJB106M010 or
Sprague 293D106X0010B
0.1µF, 10% ceramic capacitors
Vitramon VJ1206Y104KXX
1000pF, 10% ceramic capacitors
Vitramon VJ1206Y102KXX
75Ω, 5% resistors
0Ω resistor
SMA connectors
High-frequency amplifier PC board
Note: To evaluate the MAX4178, request a MAX4178ESA free
sample.
_________________________Quick Start
The MAX4278 evaluation kit is fully assembled and test-
ed. Follow these steps to verify board operation.
Do not
turn on the power supply until all connections are
completed.
1) The circuit requires supply voltages of ±5V.
Connect the +5V supply to the V+ pad, and the -5V
supply to the V- pad. Connect the power-supply
ground to the pad marked GND.
2) Apply a signal of ±1.5V maximum to the SMA con-
nector marked IN.
3) Connect the output marked OUT to an oscilloscope
through a terminated 75Ω cable.
4) Turn on the power supply and verify the output sig-
nal on the oscilloscope.
C2, C5
C3, C4
R1, R2
RG
IN, OUT
None
2
2
2
1
2
1
______________Component Suppliers
SUPPLIER
AVX
Sprague
Vishay/Vitramon
PHONE
(803) 946-0690
(603) 224-1961
(203) 268-6261
FAX
(803) 626-3123
(603) 224-1430
(203) 452-5670
________________________________________________________________
Maxim Integrated Products
1
For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800.
For small orders, phone 408-737-7600 ext. 3468.
MAX4278 Evaluation Kit
Evaluates: MAX4178/MAX4278
_______________Detailed Description
Shutdown Control
Although the EV kit provides shutdown control circuitry
(J1) for other amplifiers, the MAX4278 and MAX4178
do not have a shutdown feature. Therefore, pin 8 is not
connected.
surface-mount ceramic capacitors are placed as close
to the MAX4278 supply pins as possible. The N.C. pins
(pins 1 and 5) are grounded to prevent unwanted noise
from coupling into the circuit. Refer to the
Grounding,
Bypassing
,
and PC Board Layout
section of the
MAX4178/MAX4278 data sheet for further details.
Layout Considerations
The MAX4278 EV kit layout is optimized for high-speed
signals. Careful attention was given to grounding,
power-supply bypassing, and signal path layout. Small,
J1
C1
10µF
10V
SHDN*
ENABLE
DISABLE
2
3
V+
8
IN
R1
75Ω
3
IN
7
C2
0.1µF
C3
1000pF
U1
2
6
5
1
RF
OPEN
C5
0.1µF
C4
1000pF
R2
75Ω
MAX4278
GND
4
OUT
GND
RG
0Ω
C6
10µF
10V
V-
* SHUTDOWN NOT APPLICABLE TO MAX4178/MAX4278
Figure 1. MAX4278 EV Kit Schematic
2
_______________________________________________________________________________________
MAX4278 Evaluation Kit
Evaluates: MAX4178/MAX4278
Figure 2. MAX4278 EV Kit Component Placement Guide—
Component Side
Figure 3. MAX4278 EV Kit Component Placement Guide—
Solder Side
_______________________________________________________________________________________
3
MAX4278 Evaluation Kit
Evaluates: MAX4178/MAX4278
Figure 4. MAX4278 EV Kit PC Board Layout—Component Side
Figure 5. MAX4278 EV Kit Board Layout—Solder Side
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
4
_____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 1997 Maxim Integrated Products
Printed USA
is a registered trademark of Maxim Integrated Products.
Plik z chomika:
Kot_Maciek
Inne pliki z tego folderu:
0001.PDF
(10 KB)
1003.PDF
(374 KB)
1002.PDF
(139 KB)
1004.PDF
(342 KB)
1005.PDF
(170 KB)
Inne foldery tego chomika:
PDF2
PDF3
SPICE
Zgłoś jeśli
naruszono regulamin