Scratch LIVE Quick Start Guide.pdf
(
158 KB
)
Pobierz
QUICK START
Before installing, visit the Oicial Scratch
LIVE
Forum at
scratchlive.net
to be sure you have the latest software. Check this regularly for software
updates and performance tips.
Installation
1) Install the Software
Mac
1. Insert the Software Installation CD and double-click the installer icon.
Windows XP
1. Insert the Software Installation CD. If Setup doesn’t start automati-
cally, browse to the CD drive and run
setup.exe
.
2. Follow the on-screen instructions. Once the installation is complete,
Scratch Live appears in the Start Menu under All
Programs > Serato
> Scratch Live
.
Note:
Select
Custom Install
to change the directory
you wish to install Scratch
LIVE
into, and to install the included MP3s.
Calibrating the Software
When setting up Scratch
LIVE
in a new location, calibrate the software to
the background noise picked up by the needles, cables and CD players.
1. When using turntables, place the needles on the records with the
motors of and switch to the
setup
screen. When using CD players,
pause the CD and switch to the
setup
screen.
2. Press and hold the
estimate
button for each side, letting go when
the threshold setting is stable (usually about one second). In situations
with lots of background noise, the threshold will need to be higher.
3. Start the motors, and adjust the
L/R Balance
and
P/A Balance
next
to each calibration scope to adjust the shape of the inner ring. Use
the scope zoom slider (
1x
to
16x
) to zoom in or out as necessary.
If
you have trouble getting the rings circular, try cleaning or changing your
needles. If the image appears as a line, then one channel of the turntable is
not working. See examples of problems and ixes on pages Manual-24-25.
4. Check the percentage (%) in the bottom right corner of each calibra-
tion scope, indicating the percentage of readable signal — this number
should be close to 100% when your system is calibrated properly.
2) Connect the Hardware
Mac
Mac users need only connect the SL 1 interface after installing the soft-
ware. No extra hardware installation is required.
Windows XP
1. Connect the SL 1 interface to your computer with the USB cable.
2. he
Windows New Hardware Wizard
appears.
3. Insert the Software Installation CD, then press
Next
.
4. Windows may complain that the software driver is not digitally signed.
Choose
Continue Anyway
.
5. Click
Finish
once installation is complete.
Optional connections
•
To play normal records, connect the
THRU OUTPUTS
of the SL 1 to
the mixer’s phono inputs, then select Phono on your mixer for normal
vinyl playback. his plays “thru” without disconnecting any wires.
•
To play normal CDs, connect the
THRU OUTPUTS
to a set of line
inputs on the mixer when using CD players (when using Scratch
LIVE
with CD players you will need a mixer with a total of four line inputs).
his plays normal CDs “thru” without disconnecting any wires.
Note: power is required, either from the USB port or an external 9 VDC
power supply when using the THRU outputs.*
•
Connect a dynamic microphone to the
MIC INPUT
of the SL 1 to be
able to scratch your own mic recordings.
See page Manual-17
.
•
Connect a ¼" to ¼" cable from the
MIC THRU
jack on the SL 1 to the
microphone input on your DJ mixer to allow normal use of the mic,
independent of Scratch
LIVE
. (Note: power is required, either from the
USB port or an external 9 VDC power supply. See the manual.)
•
* Connect an external power supply to the SL 1 to power the
THRU
channels when USB power is not present. his allows you to play
vinyl (or CDs) when the laptop is not present, useful for permanent
installations or when using more than one laptop. he power supply
is 9 VDC, 300 mA (or more) using a P6 type barrel plug.
Radio Shack
carries a compatible supply. Use model 273-1770 with Adaptaplug N.
Connections
Turntable connection
1. Connect your turntables to
INPUTS 1
and
2
of the SL 1 interface.
When connected properly, circles will be displayed within the scope view of
the
setup
screen while playing the control records (see Calibrating Scratch
LIVE
in the manual for more info).
2. Connect the turntable ground wires to the ground post of your mixer.
3. Connect the
LINE OUTPUTS
of the SL 1 to the line inputs (sometimes
called CD or AUX) on your DJ mixer, check that those inputs are
switched to line level.
If audio from Scratch
LIVE
sounds excessively loud or distorted, the
LINE
OUTPUTS
have been connected to phono level inputs by mistake.
4. Connect the USB cable from the SL 1 to your Mac or PC.
Windows XP drivers need to be installed when connecting the SL 1 to a
USB port on a PC. On some Windows machines, each USB port is treated
separately, requiring a separate driver install for each USB port.
CD player connection
1. Connect your CD players to
INPUTS 1
and
2
of the SL 1 interface.
When connected properly, circles will be displayed within the scope view of
the
setup
screen while playing the control CDs (see Calibrating Scratch
LIVE
in the manual for more info).
2. Connect the
LINE OUTPUTS
of the SL 1 to the line inputs on your DJ
mixer, check that those inputs are switched to line level.
If audio from Scratch
LIVE
sounds excessively loud or distorted, the
LINE
OUTPUTS
have been connected to phono level inputs by mistake.
3. Connect the USB cable from the SL 1 to your Mac or PC.
Windows XP drivers need to be installed when connecting the SL 1 to a
USB port on a PC. On some Windows machines, each USB port is treated
separately, requiring a separate driver install for each USB port.
USB TO COMPUTER
TO MIC
FROM TURNTABLE OR CD PLAYER OUT
FROM TURNTABLE OR CD PLAYER OUT
FROM TURNTABLE GROUND
FROM TURNTABLE GROUND
MIC IN
PHONO
LINE
PHONO
LINE
GROUND
Keyboard shortcuts
hese actions can be accessed directly from the computer keyboard.
Key
Version 1.5
Action
Locate the current track. his will highlight the track you most recently loaded.
Pressing
ctrl - L
again will alternate between the tracks recently loaded on both decks.
ctrl - L
Reveal - the highlighted song is opened in a ile browser.
ctrl - R
Find - moves the cursor to the search box.
ctrl - F
Select all.
ctrl - A
Copy text in edit mode.
ctrl - C
Edit text.
ctrl - E
Paste text in edit mode.
ctrl - V
Cut text in edit mode.
ctrl - X
Undo last track load.
ctrl - Z
Move focus up / down through the library or crates. Note that if you have a song highlighted in the song view,
and use
shift - ctrl -
you will move up or down through the library or crates. When you release the shift or
ctrl key, the focus will go back to the song view so that you can move up and down through songs using
.
shift - ctrl -
shift - ctrl -
Add tracks to the prepare window.
ctrl - P
Start a new mic recording.
ctrl - N
ctrl - O
Open the track in your default MP3/WAV/OGG/AIF player.
Zoom the main waveform display.
-
or
+
Alternate focus between crates or songs.
tab
Remove track from library, remove track from crate, delete crate (does not delete the ile).
ctrl - del
and
ctrl - backspace
Delete the ile from your library
and
send to the recycle bin.
(Note to iTunes users: iles in your iTunes library cannot be deleted this way).
ctrl - shift - /
Toggle the input reverse switch
esc
Clear search string if searching, or
exit Scratch
LIVE
.
Note: Playback, cue and speed controls use Shift or Caps Lock
Left Deck
ctrl - shift - del
and
ctrl - shift - backspace
Action
Right Deck
Load the highlighted song to a deck.
ctrl -
or
shift -
ctrl -
or
shift -
Load the track currently on one deck onto the other deck as well.
ctrl - shift -
ctrl - shift -
Swap the two currently playing tracks from one deck to the other.
ctrl - /
ctrl - /
Unload the track from a deck. (
shift - option -
or
on some Macs).
shift - alt -
shift - alt -
Place a cue point.
ctrl - , (comma)
ctrl - . (period)
Jump to cue points in track.
(
rel
and
int
modes)
1 2 3 4 5
6 7 8 9 0
Switch deck to
abs
mode.
F1
F6
F2
Switch deck to
rel
mode.
F7
F3
Switch deck to
int
mode.
F8
Play / pause reverse.
Q
A
Play / pause forward.
W
S
Pitch down.
E
D
Pitch up.
R
F
Bend down.
(
rel
and
int
modes)
T
G
Bend up.
(
rel
and
int
modes)
Y
H
Censor.
(
rel
and
int
modes)
U
J
Go to temporary cue point.
(
rel
and
int
modes)
I
K
Set / adjust loop in-point.
O
L
Set / adjust loop out-point.
P
;
Loop on / of.
[
'
Loop with jump.
ctrl - [
ctrl - '
Load previous track.
alt - Q
alt - A
Load next track.
alt - W
alt - S
Rewind.
(
rel
and
int
modes)
alt - E
alt - D
Fast forward.
(
rel
and
int
modes)
alt - R
alt - F
Set temporary cue point.
(
rel
and
int
modes)
ctrl - I
ctrl - K
©Rane Corporation 10802 47th Ave. W., Mukilteo WA 98275-5098 USA TEL 425-355- 6000 FAX 425-347-7757 WEB w w w.rane.com
All features & speciications subject to change without notice. 1533 P/N 14699
Plik z chomika:
glizda145
Inne pliki z tego folderu:
MP4 Manual.pdf
(2367 KB)
Scratch LIVE Manual.pdf
(2310 KB)
MP4 Quick Start Guide.pdf
(550 KB)
Scratch LIVE Quick Start Guide.pdf
(158 KB)
mp4asio.dll
(140 KB)
Inne foldery tego chomika:
Pliki dostępne do 08.07.2024
Pliki dostępne do 19.01.2025
Filmy
Gry
Muzyka
Zgłoś jeśli
naruszono regulamin