****************************************************************************** * Genius LAN GE2500III Ethernet Card -- NetWare Driver * ****************************************************************************** Driver installation Guide for NetWare OS2 ODI client ========================================================== Introduction ============ This document describes the procedure to install Netware OS2 ODI driver for GE2500III PCI Ethernet Adapter. Installation Procedures ======================= Before you start with the installation procedure, make sure that the adapter is properly installed and configured. Similarly, Make sure that your NetWare Requester for OS/2 is properly installed. Please refer to "Novell NetWare Requester for OS/2" documentation for a detailed Requester and Utilities installation guide. 1. Copy the PCIOS2.SYS file into the NETWARE subdirectory of your hard disk from the Driver Diskette A:\NETWARE\OS2ODI. 2. Add or replace the PCIOS2.SYS in the CONFIG.SYS file. 3. Edit the NET.CFG file that you copied over. Edit the file per your requirements (see examples above). If there are two frame types listed, whichever frame type is listed first, that is the one that the driver will load. See above for examples. 4. Reboot your system to get service of network. --- Sample CONFIG.SYS file --- : DEVICE=C:\NETWARE\LSL.SYS ; OS/2 Requester supported DEVICE=C:\NETWARE\DDAEMON.SYS ; OS/2 Requester supported DEVICE=C:\NETWARE\PCIOS2.SYS ; Manufacturer supported DEVICE=C:\NETWARE\IPX.SYS ; OS/2 Requester supported : --- Sample NET.CFG file --- : LINK DRIVER PCIOS2 FRAME ETHERNET_802.3 FRAME ETHERNET_802.2 ======================================================================
ekobudowa