TL-MR3420_V3_QIG.pdf

(212 KB) Pobierz
Get Started
Quick
Installation Guide
3G/4G Wireless N Router
TL-MR3420
Follow the specific instructions in this guide to connect to the
Internet and enjoy.
> Refer to
Plug and Play via 3G/4G USB Modem
to share the Internet
through a 3G/4G USB modem.
> Refer to
Connect to DSL/Cable/Satellite Modem
to share the
Internet through a DSL/Cable/Satellite modem or an Ethernet cable
connection.
The router can also be configured with a primary WAN and a 3G/4G
USB modem as a backup (secondary) solution to ensure "always-on"
Internet connectivity. Refer to the User Guide for detailed instructions.
7106505290 REV3.0.0
Plug and Play via 3G/4G USB Modem
3G/4G USB Modem
Power Adapter
TL-MR3420
WIFI
POWER
ON/OFF
WAN
1
2
3
4
WPS/
RESET
USB
1
Press to turn on the router.
2
Plug in a 3G/4G USB modem with a
SIM/UIM card.
3
Wait for 1-2 minutes and check the status of the following LEDs.
Enjoy your Internet!
Wired connection:
Connect your devices to the router's LAN (1 - 4) ports
via Ethernet cables.
Wireless connection:
Use the default SSID and password printed on the
bottom of the router to join the wireless network.
Power
On
Wi-Fi
On
Internet
Green
USB
On
Note:
1. If the Internet LED (
connection
below.
) is not on or is amber, please refer to
Con guring your 3G/4G
WIFI
POWER
ON/OFF
WPS/RESET
2. If the Wi-Fi LED ( ) is off, press the Wi-Fi button on the rear panel for 3 seconds and then
check the LED again.
Wired
TL-MR3420
Wireless
Tip:
You can easily turn on/off the Wi-Fi as needed by pressing the Wi-Fi button
on the rear
panel
for 3 seconds.
Con guring your 3G/4G connection
1. Connect your device to the router’s LAN (1 - 4) port via an Ethernet cable or
use the default SSID and password printed on the bottom of the router to
join the wireless network.
2. Open a web browser, enter
http://tplinkwi .net
into the address bar, use
admin
for both username and password, and then click
Login.
Note: If the login window does not appear, please refer to FAQ > Q3.
4. Select
3G/4G Only
and click
Next.
5. Select your
Region
and
Mobile ISP,
then click
Next.
Note: If your ISP is not listed, select the
Set Dial number, APN, Username and Password
manually
option and enter the 3G/4G information provided by your Internet Service
Provider (ISP).
Note: If you change the default SSID (wireless network name) and password during the
configuration process, connect all your wireless devices with the new SSID and password.
6. Continue to follow the
Quick Setup
to complete the configuration.
3. Select your
Region
and
Time zone,
then click
Next.
Connect to DSL/Cable/Satellite Modem
1. Connect the hardware
Note: If your Internet connection is through an Ethernet cable from the wall instead of through a DSL/Cable/Satellite modem, connect the Ethernet cable directly to the router’s WAN port.
1
Power off the modem and
remove the backup battery if it
has one.
3
Turn on the modem and then
wait about 2 minutes for it to
completely boot up.
Power
Adapter
Internet
Power
Adapter
4
Press to turn
on the router.
2
Connect an Ethernet
cable from the modem to
the router's WAN port.
Modem
WIFI
POWER ON/OFF
WAN
1
2
3
4
WPS/
RESET
TL-MR3420
5
Verify that the hardware connection is correct by checking these LEDs.
Power
On
Wi-Fi
On
Internet
Green
Note: If the Wi-Fi LED is not on, press the Wi-Fi button on the rear panel for 3 seconds and then check the LED again.
2. Con gure via a web browser
1
Connect your device to the router’s LAN
(1 - 4)
port
via an Ethernet cable or use the default SSID and
password printed on the bottom of the router to
join the wireless network.
2
Open a web browser, enter
http://tplinkwi .net
in the address bar, use
admin
for both username
and password, and then click
Login.
Note: If the login window does not appear, please refer to FAQ > Q3.
http://tplinkwifi.net
4
Select
WAN Preferred
and click
Next.
Operation Mode
Wireless Settings
Test Your Connection
Region and Time zone
3G/4G Settings
Summary
3G/4G Only-Only
use 3G/4G as the access to the Internet
3G/4G Preferred-Only
use 3G/4G as the primary access, WAN as a backup
Wireless
admin
admin
Login
WAN Preferred-Only
use WAN as the primary access, 3G/4G as a backup
WAN Only-Only
use WAN as the access to the Internet
Back
Next
Wired
3
Select your
Region
and
Time zone,
then click
Next.
5
Continue to follow the
Quick Setup
to complete
the configuration.
Enjoy your Internet!
Note: If you change the default SSID (wireless network name) and password during the configuration process, connect all your wireless devices with the new SSID and password.
FAQ (Frequently Asked Questions)
Q1. What should I do if I cannot get Internet access from the
3G/4G USB modem?
A1. Go to our website at
www.tp-link.com,
click
Support
>
Compatibility List
>
TL-MR3420
and
make sure that your 3G/4G USB modem is on the
compatibility list.
A2. Make sure that you have a valid SIM/UIM card
inserted into the 3G/4G USB modem.
A3. Plug the 3G/4G USB modem directly into your
computer and disable the PIN verification via the
modem utility to check if you have the Internet
connection on your computer.
A4. Obtain the latest
dial number
and
APN
from your
ISP, and update these information through the
router's web interface.
Note: For more troubleshooting help, please refer to FAQ (ID:400)
on our website:
http://www.tp-link.com/en/support/faq.
Q2. How to reset the router to its factory default settings?
A1. While the router is powered on, press and hold
the
WPS/RESET
button on the rear panel until all
the LEDs are on and then release the button. The
router will automatically reboot itself.
A2. Log into the router's web interface. Go to
Advanced
>
System Tools
>
Factory Default
and
click
Restore.
The router will restore and reboot
automatically.
Q3. What should I do if the login window does not appear?
A1. If the computer is set to a static or fixed IP address,
change the setting to obtain an IP address
automatically.
A2. Verify that
http://tplinkwi .net
is correctly
entered in the web browser. Alternatively, check
spacing and enter
http://192.168.0.1
or
http://192.168.1.1
in the web browser.
A3. Use another web browser and try again.
A4. Please reset your router to its factory default
settings ( FAQ > Q2) and try again.
A5. Disable then enable the network adapter in use.
Q4. What should I do if I forget my web management
password?
A. Reset the router to its factory default settings ( FAQ
> Q2) and then use the default
admin
for both
username and password to log in.
Q5. What should I do if I forget my wireless network
password?
A. Log into the router’s web interface and then go to
Basic
>
Wireless
to retrieve or reset your wireless
password.
.
©2015 TP-LINK

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin