Caution point during the slide fpcb assembly_rev1[1].0.pdf

(242 KB) Pobierz

Notice

Product

Model

Subject

GSM/CDMA

All slide models

Notice No.

Notice Date

10-74

Oct ’10

Caution point during the slide fpcb assembly

1. Purpose

- To inform all authorized service centers of information about technical TIP

2. Instruction

- Respect the below process when you assemble a slide fpcb to prevent damage of it.

1) Insert a slide fpcb to the connector in horizontal with connector.

Good

No Good

2) Check the white line on the slide fpcb is matched with the line on the lcd pba.

Good

No Good

3) Make a proper position to assemble of the slide fpcb.

It depends on the models, and refer to the svc manual for more details.

Slide half-open

Slide close

4) It must be tested after assembling a slide fpcb.

- Check the slide fpcb with sliding up and down if there is a jam or not.

- Test mode : *#0*# (Refer to the bulletin : Key string for repair.)

- Receiver test mode : *#0283# (Refer to the bulletin : Key string for repair.)

* Defective Slide FPCB *

- Folded

- Dented

- Torn/Scratched