//****************** Copyright 2008 Broadcom Corp. ********************* // // Description: Common stack parm file // // $File: //depot/Sources/Common/sysparm/parm_stack.txt $ // $Revision: $ // $Changelist: $ // //****************************************************************************** //***************************************************************************** // Spinner/WCDMA setting //***************************************************************************** CLASS_PHASE R99 #ifdef UMTS #if ( MODEM_3GPP_CAPABILITY_SUPPORT >= 7) CLASS_CRYPTO A5/1 A5/3 GEA/1 GEA/2 GEA/3 UEA/0 UEA/1 UEA/2 #else CLASS_CRYPTO A5/1 A5/3 GEA/1 GEA/2 GEA/3 UEA/0 UEA/1 #endif #else CLASS_CRYPTO A5/1 A5/3 GEA/1 GEA/2 GEA/3 #endif // ifdef UMTS CLASS_PS SUPPORTED CLASS_SS SUPPORTED CLASS_SMS SUPPORTED CLASS_ES_IND SUPPORTED #ifdef UMTS CLASS_UMTS 2 // 0 - GSM only // 1 - UMTS dual-mode, default GSM // 2 - UMTS dual-mode, default UMTS // 3 - UMTS only #else CLASS_UMTS 0 #endif // ifdef UMTS DARP SUPPORTED // KEYWORDS : SUPPORTED or NOT_SUPPORTED #ifdef UMTS HSDPA_PHY_CATEGORY 8 // value: 1-12, if 0, means turn off HSDPA SUPPORT HSDPA_CLUSTER_COUNT 5 // value: 1-5, if 1 then stack will get HSDPA data from FW every TTI, 5 means stack gets HSDPA every 5 * TTI. #ifdef UMTS_HSUPA HSUPA_PHY_CATEGORY 6 // value: 1-6, if 0, means turn off HSUPA SUPPORT #endif // ****************************************************************************** // 3GPP spec release version - should be set to 6 or 7 // This will affect the reported access stratum release // ****************************************************************************** #if (MODEM_3GPP_CAPABILITY_SUPPORT == 7) 3GPP_RELEASE 7 #else 3GPP_RELEASE 6 #endif // ****************************************************************************** // Release 7 feature support - should be set to 0 or 1 // ****************************************************************************** #if ( MODEM_3GPP_CAPABILITY_SUPPORT >= 7) R7_E_FDPCH_SUPPORT 1 R7_HS_SCCHLESS_SUPPORT 1 R7_DPCCH_DTX_SUPPORT 1 R7_SLOT_FMT_4_SUPPORT 1 R7_HS_PDSCH_IN_FACH_SUPPORT 1 R7_HS_PDSCH_IN_PCH_SUPPORT 1 R7_MAC_EHS_SUPPORT 1 R7_RLC_TWO_LOGCH_SUPPORT 0 #ifdef TWO_DRX_SUPPORT R7_TWO_DRX_SCHEMES_IN_PCH_SUPPORT 1 R7_EDPDCH_POWER_INTERPOLATION_SUPPORT 1 #endif #else R7_E_FDPCH_SUPPORT 0 R7_HS_SCCHLESS_SUPPORT 0 R7_DPCCH_DTX_SUPPORT 0 R7_SLOT_FMT_4_SUPPORT 0 R7_HS_PDSCH_IN_FACH_SUPPORT 0 R7_HS_PDSCH_IN_PCH_SUPPORT 0 R7_MAC_EHS_SUPPORT 0 R7_RLC_TWO_LOGCH_SUPPORT 0 #ifdef TWO_DRX_SUPPORT R7_TWO_DRX_SCHEMES_IN_PCH_SUPPORT 0 R7_EDPDCH_POWER_INTERPOLATION_SUPPORT 0 #endif #endif UAS_GRACEFUL_ERROR_HANDLING NOT_SUPPORTED // KEYWORDS : SUPPORTED or NOT_SUPPORTED // First entry needs to be band info, choices : BAND_I BAND_II BAND_III BAND_IV BAND_V BAND_VI // Second entry needs to be power class info, choices : CLASS_I CLASS_II CLASS_III CLASS _IV // Following entries are related to measurement capabilities: FDD_DL_COMP (DL or UL) GSM_DL_900_MEA ( DL or UL) (850 or 900 or 1800 or 1900) #if defined(UMTS_BAND_1_2_4) CLASS_UMTS_BAND_MCAP BAND_I CLASS_III FDD_DL_COMP FDD_UL_COMP GSM_DL_850_MEA GSM_DL_900_MEA GSM_DL_1800_MEA GSM_DL_1900_MEA GSM_UL_850_MEA GSM_UL_900_MEA GSM_UL_1800_MEA GSM_UL_1900_MEA CLASS_UMTS_BAND_MCAP BAND_II CLASS_III FDD_DL_COMP FDD_UL_COMP GSM_DL_850_MEA GSM_DL_900_MEA GSM_DL_1800_MEA GSM_DL_1900_MEA GSM_UL_850_MEA GSM_UL_900_MEA GSM_UL_1800_MEA GSM_UL_1900_MEA CLASS_UMTS_BAND_MCAP BAND_IV CLASS_III FDD_DL_COMP FDD_UL_COMP GSM_DL_850_MEA GSM_DL_900_MEA GSM_DL_1800_MEA GSM_DL_1900_MEA GSM_UL_850_MEA GSM_UL_900_MEA GSM_UL_1800_MEA GSM_UL_1900_MEA #elif defined(UMTS_BAND_1_3_8) CLASS_UMTS_BAND_MCAP BAND_I CLASS_III FDD_DL_COMP FDD_UL_COMP GSM_DL_850_MEA GSM_DL_900_MEA GSM_DL_1800_MEA GSM_DL_1900_MEA GSM_UL_850_MEA GSM_UL_900_MEA GSM_UL_1800_MEA GSM_UL_1900_MEA CLASS_UMTS_BAND_MCAP BAND_III CLASS_III FDD_DL_COMP FDD_UL_COMP GSM_DL_850_MEA GSM_DL_900_MEA GSM_DL_1800_MEA GSM_DL_1900_MEA GSM_UL_850_MEA GSM_UL_900_MEA GSM_UL_1800_MEA GSM_UL_1900_MEA CLASS_UMTS_BAND_MCAP BAND_VIII CLASS_III FDD_DL_COMP FDD_UL_COMP GSM_DL_850_MEA GSM_DL_900_MEA GSM_DL_1800_MEA GSM_DL_1900_MEA GSM_UL_850_MEA GSM_UL_900_MEA GSM_UL_1800_MEA GSM_UL_1900_MEA #elif defined(UMTS_BAND_1_2_8) CLASS_UMTS_BAND_MCAP BAND_I CLASS_III FDD_DL_COMP FDD_UL_COMP GSM_DL_850_MEA GSM_DL_900_MEA GSM_DL_1800_MEA GSM_DL_1900_MEA GSM_UL_850_MEA GSM_UL_900_MEA GSM_UL_1800_MEA GSM_UL_1900_MEA CLASS_UMTS_BAND_MCAP BAND_II CLASS_III FDD_DL_COMP FDD_UL_COMP GSM_DL_850_MEA GSM_DL_900_MEA GSM_DL_1800_MEA GSM_DL_1900_MEA GSM_UL_850_MEA GSM_UL_900_MEA GSM_UL_1800_MEA GSM_UL_1900_MEA CLASS_UMTS_BAND_MCAP BAND_VIII CLASS_III FDD_DL_COMP FDD_UL_COMP GSM_DL_850_MEA GSM_DL_900_MEA GSM_DL_1800_MEA GSM_DL_1900_MEA GSM_UL_850_MEA GSM_UL_900_MEA GSM_UL_1800_MEA GSM_UL_1900_MEA #elif defined(UMTS_BAND_2_4_5) CLASS_UMTS_BAND_MCAP BAND_IV CLASS_III FDD_DL_COMP FDD_UL_COMP GSM_DL_850_MEA GSM_DL_900_MEA GSM_DL_1800_MEA GSM_DL_1900_MEA GSM_UL_850_MEA GSM_UL_900_MEA GSM_UL_1800_MEA GSM_UL_1900_MEA CLASS_UMTS_BAND_MCAP BAND_II CLASS_III FDD_DL_COMP FDD_UL_COMP GSM_DL_850_MEA GSM_DL_900_MEA GSM_DL_1800_MEA GSM_DL_1900_MEA GSM_UL_850_MEA GSM_UL_900_MEA GSM_UL_1800_MEA GSM_UL_1900_MEA CLASS_UMTS_BAND_MCAP BAND_V CLASS_III FDD_DL_COMP FDD_UL_COMP GSM_DL_850_MEA GSM_DL_900_MEA GSM_DL_1800_MEA GSM_DL_1900_MEA GSM_UL_850_MEA GSM_UL_900_MEA GSM_UL_1800_MEA GSM_UL_1900_MEA #elif defined(UMTS_BAND_2_5) CLASS_UMTS_BAND_MCAP BAND_II CLASS_III FDD_DL_COMP FDD_UL_COMP GSM_DL_850_MEA GSM_DL_900_MEA GSM_DL_1800_MEA GSM_DL_1900_MEA GSM_UL_850_MEA GSM_UL_900_MEA GSM_UL_1800_MEA GSM_UL_1900_MEA CLASS_UMTS_BAND_MCAP BAND_V CLASS_III FDD_DL_COMP FDD_UL_COMP GSM_DL_850_MEA GSM_DL_900_MEA GSM_DL_1800_MEA GSM_DL_1900_MEA GSM_UL_850_MEA GSM_UL_900_MEA GSM_UL_1800_MEA GSM_UL_1900_MEA #elif defined(UMTS_BAND_1_8) CLASS_UMTS_BAND_MCAP BAND_I CLASS_III FDD_DL_COMP FDD_UL_COMP GSM_DL_850_MEA GSM_DL_900_MEA GSM_DL_1800_MEA GSM_DL_1900_MEA GSM_UL_850_MEA GSM_UL_900_MEA GSM_UL_1800_MEA GSM_UL_1900_MEA CLASS_UMTS_BAND_MCAP BAND_VIII CLASS_III FDD_DL_COMP FDD_UL_COMP GSM_DL_850_MEA GSM_DL_900_MEA GSM_DL_1800_MEA GSM_DL_1900_MEA GSM_UL_850_MEA GSM_UL_900_MEA GSM_UL_1800_MEA GSM_UL_1900_MEA #else CLASS_UMTS_BAND_MCAP BAND_I CLASS_III FDD_DL_COMP FDD_UL_COMP GSM_DL_850_MEA GSM_DL_900_MEA GSM_DL_1800_MEA GSM_DL_1900_MEA GSM_UL_850_MEA GSM_UL_900_MEA GSM_UL_1800_MEA GSM_UL_1900_MEA CLASS_UMTS_BAND_MCAP BAND_II CLASS_III FDD_DL_COMP FDD_UL_COMP GSM_DL_850_MEA GSM_DL_900_MEA GSM_DL_1800_MEA GSM_DL_1900_MEA GSM_UL_850_MEA GSM_UL_900_MEA GSM_UL_1800_MEA GSM_UL_1900_MEA CLASS_UMTS_BAND_MCAP BAND_V CLASS_III FDD_DL_COMP FDD_UL_COMP GSM_DL_850_MEA GSM_DL_900_MEA GSM_DL_1800_MEA GSM_DL_1900_MEA GSM_UL_850_MEA GSM_UL_900_MEA GSM_UL_1800_MEA GSM_UL_1900_MEA #endif // ****************************************************************************** // UE feature support - KEYWORDS should be set to SUPPORTED or NOT_SUPPORTED // ****************************************************************************** UMTS_LOSSLESS_SRNS SUPPORTED // PDCP LOSSLESS SRNS RELOC SUPPORT KEYWORDS : SUPPORTED or NOT_SUPPORTED UMTS_INTEGR_PROT_CAP SUPPORTED // INTEGRITY PROT CAPABILITY KEYWORDS : SUPPORTED or NOT_SUPPORTED UMTS_ROHC_RFC3095 NOT_SUPPORTED UMTS_RFC3095_CONTEXT_RELOC NOT_SUPPORTED UMTS_IPHC_RFC2507 SUPPORTED UMTS_FDPCH SUPPORTED UMTS_UTRAN_TO_GERAN_PS_HANDOVER SUPPORTED UMTS_LOSSLESS_DL_PDU_SIZE_CHANGE SUPPORTED UMTS_SIB11BIS SUPPORTED UMTS_FAST_DORMANCY NOT_SUPPORTED #endif // ifdef UMTS CLASS_RF_BAND EGSM 4 2 CLASS_RF_BAND GSM850 4 2 CLASS_RF_BAND DCS 1 2 CLASS_RF_BAND PCS 1 2 CLASS_MS_CLASS 12 CLASS_MS_CLASS_EGPRS 12 ENABLE_CLASS12_MODS 0x000e //bit 1 and 2 enable class 12 flags, bit 15 disable big endian byte swap in DSP UPLINK_8PSK SUPPORTED // CQ92356: Hezhi 10/2009: SUPPORTED or NOT_SUPPORTED CLASS_MS_CLASS_HSCSD 0 CHANNEL_TYPE DUAL_RATE CHANNEL_MODE SIGNALLING_ONLY CHANNEL_MODE SPEECH_FULL SPEECH_FULL_V2 SPEECH_HALF SPEECH_FULL_V3 SPEECH_HALF_V3 SPEECH_FULL_V6 CHANNEL_MODE DATA_96 //DATA_144 DATA_96 DATA_48_FULL PREF_CHAN_MODE SPEECH_FULL_RATE_V1 PREF_CHAN_MODE SPEECH_FULL_RATE_V2 MS_OPMODE GPRS_CLASS_B // GPRS MS Operation Mode B==Voice and Data MS_PREF_SERVICE CIRCUIT_SWITCHED // GPRS MS Preferred Service //****************************************************************************** // Test Control //****************************************************************************** ANTENNA_SWITCH_MASK 0x10d // This is for Single-Antenna solution, the mask should match with the GPEN setting for antenna switchplexer // For dual-antenna solution, the mask should be zero ANTENNA_SWITCH_VAL 0x100 // Default value for 3G: GPEN2-0 = 000 // Based on GPWR set below (the proper value?) ANTENNA_SWITCH_DELAY 0x01b8 // The delay (Unit: QBC) between RF warmup and IRAT Gap start, this value should be the same as RX_GPIO_DELAY D0+D1 #ifdef UMTS MST_WCDMA 1 //****************************************************************************** // WCDMA OLPC parameters //****************************...
comeone3